Save time with fast sample processing with the MicroCL 21 microcentrifuges that deliver performance, versatility, safety and convenience in a compact, easy-to-use lab instrument.
- Capacity – 24×1.5 / 2.0 ml;
- maximum acceleration – up to 14800 rpm (up to 21100 g);
- timer up to 99 min and continuous mode;
- digital display with time, speed (rpm) and acceleration (g);
- quick acceleration and deceleration button;
- dimensions, WxDxH, cm – 22.5×24.3×35.2;
- weight with rotor, net, kg – 10.5.
Роторы и адаптеры:
- angular rotor, 18 places of 0.5 ml and 18 places of 2.0 ml, with lid;
- angular ClickSeal rotor, 24 places, 1.5/2.0 ml each, with biocontamination lid;
- angular rotor, 36 places of 0.5 ml, with lid;
- hematocrit rotor, 24 places for hematocrit capillaries;
- angular rotor, 32 places of 0.2 ml, or for 4 strips, with a lid against biocontamination;
- angular rotor, 64 places of 0.2 ml, or for 8 strips, with a lid;
- adapter for 0.5 ml and 0.6 ml tubes, 24 pcs.;
- adapter for 0.4 ml tubes, 24 pcs.;
- adapter for PCR tubes 0.2 ml, 24 pcs.
PRODUCT DESCRIPTION
Micro centrifuges – compact benchtop centrifuges for 0.2 ml, 1.5/2 ml and 5 ml Eppendorf tubes, PCR strips, spin columns, with a maximum rotor capacity of 6 to 48 tubes, with an acceleration of up to 25 000 g. Basically, these centrifuges are equipped with fixed-angle rotors (so-called angular). There are centrifuges with both a single rotor available and a wide selection of rotors. There are unique rotors – for PCR plates, a bucket rotor for 1.5 ml tubes, a rotor for spin columns (centrifugation of tubes with open lids).
Base models have no programming capability – only start at maximum acceleration and stop at shutdown. Digitally controlled centrifuges can be programmed for the desired acceleration, centrifugation time, and, depending on the model, set the cooling to a certain temperature. The presence of a cooling function in the centrifuge allows you to centrifuge temperature-sensitive samples.
To select a centrifuge for your tasks, you need to pay attention to the following characteristics: what centrifugal acceleration (g) is required by the protocol; what volume of tubes is planned to be centrifuged; centrifuge capacity; whether refrigeration is required during centrifugation; the possibility of programming; whether the rotor is required to be aerosol-tight.
