Thermo FS Heracell 240i

CO₂ incubator, 240 l, direct heating, TC sensor, wet sterilization, stainless steel chamber, Heracell 240i, Thermo FS

CO₂-incubators Heracell:

• heating method – direct heating. The air flow is distributed through the chamber with the help of a fan motor located inside the chamber;
• the chambers are made of stainless steel, but at the request of the customer, it is possible to create a CO₂-incubator with a chamber made of 100% copper, known for its antibacterial properties, at the factory;
• temperature sensors with PID controller provide protection against overheating by preventing a change in the set temperature during the restoration of the operating parameters of the CO₂ incubator; the temperature is restored to the set value in less than 5 minutes;
• humidification system – natural evaporation of water from a built-in humidification tray located above the bottom heating element, which only works when the door is open, which ensures faster recovery time;
• ContraCon decontamination procedure at 90°C for 9 hours without dismantling and removal of sensors, fan and other accessories from the working chamber for additional autoclaving;
• emergency signaling system included as standard, remote signaling as an option;
• incubators can be stacked on top of each other.

Heracell 240 i:

• CO₂ range, % — from 1 to 20;
• internal volume of the chamber, l – 240;
• temperature range, °С — from +3 above room temperature to +55;
• microprocessor temperature controller;
• temperature maintenance accuracy, °С — ± 0.1;
• temperature homogeneity °С — ± 0.5 at 37 °С;
• accuracy of maintenance of CO₂ level, % — ± 0.1;
• humidity, % – > 93 (at 37 °С);
• liquid crystal touch display;
• The TC180 thermoconductometric sensor is highly stable against fluctuations in CO₂ incubator atmosphere thanks to built-in humidity compensation to minimize reading drift between calibrations.
• zirconium O₂ level sensor in the chamber (optional) provides precise maintenance of the physiological level of oxygen, creating the best conditions for growing cell cultures;
• O₂ range, % — from 1 to 21 or 5-90;
• accuracy of maintaining the level of О₂, % — ± 0.1;
• number of shelves std. / max., pcs. – 3 / 12;
• Max. load per shelf/total, kg –—10/30;
• internal glass door, pcs – 1;
• alarm connector, USB port;
• wet sterilization – 90 ° C;
• working power / during the sterilization cycle, W – 640;
• net / gross dimensions, W x D x H, mm – 780 x 834 x 934 / 1000 x 1100 x 1200;
• net / gross weight, kg – 81 / 115.